Details

---

PAVAVISION FU3EX-100/101 100m USB 3.2 Extender Kit Malaysia

Professional Long-Distance USB Extension for AV, Conferencing & USB Devices

The PAVAVISION FU3EX-100/101 is a professional 100m USB 3.2 Extender Kit designed to extend high-speed USB connectivity between a host computer and remotely installed USB devices.

The complete system consists of:

1 × Transmitter + 1 × Receiver

Supporting USB 3.2 Gen 1 with data rates up to 5Gbps, the FU3EX-100/101 allows compatible USB signals to be extended over distances of up to 100 metres through a dedicated USB3-LINK connection.

The system also supports RS232 and FSYNC GPIO pass-through, Control, Bulk, Interrupt and Isochronous USB transfer protocols, making it suitable for professional AV installations, meeting rooms, USB camera systems and other applications where conventional USB cable distance is insufficient.

Up to 100m USB Transmission Distance

The core advantage of the FU3EX-100/101 is its ability to extend USB connectivity up to:

100 metres

This is useful in professional rooms where the host computer, equipment rack and USB devices cannot be positioned close together.

Typical installations may have the host PC in an AV rack or control location while the USB camera or peripheral is installed near the display, lectern or meeting table.

The FU3EX-100/101 helps bridge that distance without requiring the host computer to be relocated.

USB 3.2 Gen 1 with Up to 5Gbps Data Rate

The FU3EX-100/101 supports:

USB 3.2 Gen 1

with a maximum specified data rate of:

Up to 5Gbit/s

It is also backward compatible with:

• USB 3.0
• USB 2.0
• USB 1.1

This allows compatible USB devices from different USB generations to be integrated into the same long-distance extension system.

Transmitter + Receiver Architecture

The FU3EX-100/101 operates as a complete extender pair.

Transmitter

The transmitter is installed at the USB host / computer side.

Connections include:

• 1 × USB HOST – USB Type-B
• 1 × RS232 & FSYNC – 4-Pin Phoenix
• 1 × USB3-LINK – RJ45
• 1 × Power Input
• 1 × Firmware – Micro-USB

Receiver

The receiver is installed near the remote USB devices.

Connections include:

• 4 × USB Device – USB Type-A
• 1 × RS232 & FSYNC – 4-Pin Phoenix
• 1 × USB3-LINK – RJ45
• 1 × Power Input
• 1 × Firmware – Micro-USB

This design allows the host side and USB device side to be separated across a much longer distance than standard USB cabling normally allows.

4 USB Device Ports at the Receiver

The receiver provides:

4 × USB Type-A Device Ports

This gives installers flexibility when multiple USB peripherals need to be positioned at the remote end.

Depending on compatibility and system requirements, this can be useful for professional USB peripherals such as:

• USB Cameras
• Conference Cameras
• USB Audio Devices
• AV Control Devices
• Other USB Peripherals

Compatibility should still be confirmed according to the actual connected device.

Dedicated USB3-LINK RJ45 Connection

The transmitter and receiver are linked using a dedicated:

USB3-LINK RJ45 Interface

Although the physical connector is RJ45, the supplied documentation identifies it specifically as USB3-LINK.

For accuracy, the product should not be marketed as a standard Ethernet or IP-based USB extender unless that function is officially confirmed.

Valens-Based Long-Distance USB Extension

The supplied product material identifies the FU3EX-100/101 as a:

100m USB 3.2 Extender Using Valens Chip

This makes it suitable for professional applications where stable long-distance USB transport is required.

RS232 & FSYNC GPIO Pass-Through

The FU3EX-100/101 also supports:

RS232 & FSYNC GPIO Pass-Through

through its 4-pin Phoenix interface.

This adds additional control and synchronization capability for more advanced AV integration projects.

It can be useful where USB extension needs to be combined with equipment control or synchronization signals.

Supports Multiple USB Transfer Protocols

The system supports:

• Control
• Bulk
• Interrupt
• Isochronous

USB transfer protocols.

This is especially relevant for professional USB devices because different peripherals may rely on different USB transfer methods.

Isochronous support is particularly important for real-time USB audio and video applications.

Transmitter Can Be Powered by USB Host

The supplied specification states:

TX Can Be Powered by USB Host

This may simplify transmitter-side installation in supported system configurations.

The system also specifies a:

12V / 3A power supply

for operation.

Plug & Play

The FU3EX-100/101 is designed for:

Plug & Play

operation.

This helps reduce setup complexity in professional meeting-room and AV installations.

Compact Installation Design

Both transmitter and receiver have compact dimensions of:

105 × 20.5 × 100mm

This compact form allows them to be integrated into:

• AV Equipment Racks
• Meeting-Room Furniture
• Behind-Display Installations
• Technical Cabinets
• Control Rooms

The transmitter weighs approximately 0.28kg, while the receiver weighs approximately 0.27kg.

Key Features

• 100m USB 3.2 Extender Kit
• Complete Transmitter + Receiver System
• USB 3.2 Gen 1
• Up to 5Gbps Data Transfer
• Up to 100m Transmission Distance
• Valens-Based Extension Architecture
• Dedicated USB3-LINK RJ45 Connection
• 4 × USB Type-A Device Ports at Receiver
• USB Type-B Host Connection
• USB 3.0 / USB 2.0 / USB 1.1 Backward Compatibility
• RS232 Pass-Through
• FSYNC GPIO Pass-Through
• Control Transfer Support
• Bulk Transfer Support
• Interrupt Transfer Support
• Isochronous Transfer Support
• TX Can Be Powered by USB Host
• Plug & Play
• Compact Professional AV Design

Ideal Applications

The PAVAVISION FU3EX-100/101 is suitable for:

• Video Conferencing Rooms
• Corporate Boardrooms
• Meeting Rooms
• USB PTZ Camera Installations
• Hybrid Collaboration Rooms
• Training Rooms
• Lecture Rooms
• Education AV Systems
• Control Rooms
• Professional AV Installations
• Equipment Rack Installations
• Remote USB Peripheral Connections
• Long-Distance USB Camera Extension

It is particularly useful where the USB host computer and USB device need to be installed far apart.

Technical Specifications

Transmitter Connections

Receiver Connections

General Specifications

Frequently Asked Questions

What is the PAVAVISION FU3EX-100/101?

The FU3EX-100/101 is a USB 3.2 extender kit consisting of one transmitter and one receiver, designed to extend compatible USB connections over distances of up to 100 metres.

How far can the FU3EX-100/101 extend USB?

The specified maximum transmission distance is:

Up to 100 metres.

What USB speed does it support?

It supports USB 3.2 Gen 1 with data rates up to 5Gbps, and is backward compatible with USB 3.0, USB 2.0 and USB 1.1.

How many USB devices can be connected at the receiver?

The receiver provides:

4 × USB Type-A device ports.

Can the FU3EX-100/101 be used for USB conference cameras?

Its long-distance USB 3.2 architecture and support for isochronous USB transfers make it suitable for compatible USB camera applications. Compatibility should be confirmed against the specific camera's USB requirements.

Does it support RS232?

Yes. The extender supports RS232 and FSYNC GPIO pass-through between the transmitter and receiver.

Is the FU3EX-100/101 plug and play?

Yes. The supplied product information specifies Plug & Play operation.

100m USB Extender for Conference Rooms & Professional AV

Looking for a 100m USB extender in Malaysia for a conference room, USB camera or professional AV installation?

The PAVAVISION FU3EX-100/101 is designed for projects where USB devices must be installed significantly farther from the controlling computer than a conventional USB cable allows.

A typical connection is:

Host PC / AV Computer
→ FU3EX Transmitter
→ Up to 100m USB3-LINK
→ FU3EX Receiver
→ USB Devices

This helps clearly answer the customer problem:

How can I extend USB 3.x over a long distance in a meeting room or AV installation?

Long-Distance USB Camera Extension

In many meeting-room installations, the host computer or equipment rack may be located away from the USB camera.

For example:

Conference PC / AV Rack
→ FU3EX-100/101
→ Remote USB Camera

This allows the camera to be installed in the correct position without requiring the PC to be installed next to it.

That makes the FU3EX-100/101 particularly relevant for:

• USB Camera Extension
• PTZ Camera Installations
• Hybrid Meeting Rooms
• Video Conferencing Rooms
• Professional AV Systems

PAVAVISION FU3EX-100/101 Malaysia

For customers searching for:

100m USB Extender Malaysia
USB 3.2 Extender Malaysia
USB Camera Extender Malaysia
Long Distance USB Extender
USB Extender for Conference Room
5Gbps USB Extender

the PAVAVISION FU3EX-100/101 provides a professional transmitter-and-receiver solution for long-distance USB connectivity.

Contact PAVA for FU3EX-100/101 Quotation

Contact PAVA for:

• 100m USB extension requirements
• USB camera extension
• Video conferencing system planning
• Meeting-room AV design
• USB peripheral compatibility
• Equipment rack integration
• RS232 / FSYNC requirements
• Professional AV system design
• Project quotation

Call / WhatsApp: +60 12-688 0966
WhatsApp: https://wa.me/60126880966