Details

---

PAVAVOICE GPA410 / GPA410 Dante 4 Inputs Network DSP Power Amplifier Malaysia

High-Power 4-Channel DSP Amplifier for Professional Installed Audio

The PAVAVOICE GPA410 Network DSP Power Amplifier is a professional 4-channel digital power amplifier designed for high-output commercial and installed audio systems that require powerful amplification, built-in DSP processing, remote control and flexible speaker system integration.

Delivering 4 × 1000W at 8Ω, 4 × 1600W at 4Ω, and up to 2 × 3200W in bridged operation, the GPA410 is suitable for demanding professional applications such as auditoriums, performance venues, hotels, bars, courts and stadium sound systems.

Two variants are available:

• GPA410 – Standard Network DSP Power Amplifier
• GPA410 Dante 4 Inputs – Network DSP Power Amplifier with 4-channel Dante audio input

Built-In DSP for Loudspeaker Processing

The GPA410 integrates a professional digital signal processor that allows the amplifier to handle both power amplification and loudspeaker processing within one system.

Built-in DSP functions include:

• Parametric EQ
• Noise Gate
• Delay
• FIR Processing
• Compressor
• Limiter
• Gain Control
• Matrix Processing
• Bridge / Matrix / Free Switching Modes

The amplifier supports 48kHz / 24-bit digital processing, while the FIR function supports 4 × 2048 taps for more precise system tuning and loudspeaker optimisation.

Flexible Low-Z & High-Z Speaker Support

The GPA410 supports both conventional low-impedance speaker systems and distributed high-impedance audio systems.

Supported operation includes:

• 4Ω
• 8Ω
• 70V
• 100V

This flexibility makes the GPA410 suitable for both high-power direct loudspeaker systems and distributed commercial audio installations.

Network Control & Remote Monitoring

The GPA410 is designed for professional AV installations where system control and remote monitoring are important.

Supported control methods include:

• TCP/IP
• USB
• RS232
• RS485

The amplifier can be remotely switched on or off, while operating status can be monitored in real time through software.

A 4.3-inch IPS capacitive touch display provides local system status and configuration access from the front panel.

GPA410 vs GPA410 Dante 4 Inputs

Choose GPA410 for standard network DSP amplification.

Choose GPA410 Dante 4 Inputs when the project requires integration with a Dante audio network.

Key Features

• 4-channel network DSP power amplifier
• 4 × 1000W @ 8Ω
• 4 × 1600W @ 4Ω
• 2 × 3200W bridged output
• Built-in DSP digital processor
• 48kHz / 24-bit processing
• FIR function with 4 × 2048 taps
• PEQ
• Noise Gate
• Delay
• Compressor
• Limiter
• Matrix operation
• 70V / 100V support
• 4Ω / 8Ω support
• Adjustable input sensitivity: 0dBu / 6dBu / 12dBu
• 4.3-inch IPS capacitive touch screen
• TCP/IP network control
• USB control
• RS232 / RS485 control
• Remote power ON / OFF
• Real-time amplifier monitoring
• 4-channel Dante input on Dante variant

Ideal Applications

The PAVAVOICE GPA410 is suitable for professional audio projects such as:

• Performance venues
• Auditoriums
• Hotels
• Bars
• Courts
• Stadiums
• Multi-purpose halls
• Commercial PA systems
• Professional sound reinforcement systems
• Large AV integration projects

It is especially suitable for installations that require high amplifier output, DSP loudspeaker management and network-based system control.

Technical Specifications

Amplifier

• Amplifier Channels: 4
• Output Power @ 8Ω: 4 × 1000W
• Output Power @ 4Ω: 4 × 1600W
• Bridge Power: 2 × 3200W
• Minimum Load: 4Ω / channel

Audio Performance

• Maximum Input Level: 20dBu / 7.75V
• Input Sensitivity: 12dBu / 6dBu / 0dBu
• SNR: 103dB @ 12dBu, 1kHz
• Frequency Response: 20Hz–20kHz ±0.5dB @ 1W, 8Ω
• THD+N: <1% @ 1W to full power
• Sampling: 48kHz / 24-bit

Connections

• Input Connector: 4 × XLR
• Output Connector: 4 × speakON + 4 × Binding Post
• Control: TCP/IP, USB, RS232, RS485
• Dante Variant: 4-channel Dante audio input

Speaker System Support

• 100V
• 70V
• 8Ω
• 4Ω

Display

• 4.3-inch IPS Capacitive Touch Display

Power

• Power Supply: AC 180–264V

 

Protection Functions

The GPA410 includes multiple protection functions for professional installed use:

• DSP Limiter
• High-Temperature Protection
• DC Protection
• High-Frequency Protection
• Short-Circuit Protection
• Back EMF Protection
• Peak Current Limiter
• Surge Current Limiter
• Startup Delay
• Power Circuit Breaker Protection
• Over-Voltage Protection
• Under-Voltage Protection

Frequently Asked Questions

What is the PAVAVOICE GPA410?

The GPA410 is a 4-channel high-power Network DSP Power Amplifier designed for professional installed audio systems requiring amplification, DSP processing and remote network control.

How much power does GPA410 provide?

The GPA410 provides 4 × 1000W at 8Ω, 4 × 1600W at 4Ω, and up to 2 × 3200W in bridged operation.

Does GPA410 support 70V and 100V speakers?

Yes. The GPA410 supports 100V, 70V, 8Ω and 4Ω speaker-system configurations.

Does GPA410 have built-in DSP?

Yes. It includes DSP functions such as PEQ, Noise Gate, Delay, FIR, Compressor, Limiter and Matrix Processing.

What is the difference between GPA410 and GPA410 Dante 4 Inputs?

The standard GPA410 provides the core DSP amplifier functions, while the GPA410 Dante 4 Inputs adds four channels of Dante network audio input.

Can GPA410 be remotely monitored?

Yes. The amplifier supports remote power control and real-time operating-status monitoring through its network and software control functions.

PAVAVOICE GPA410 Malaysia

Looking for a 4-channel high-power DSP amplifier, 4x1000W network amplifier, 70V / 100V power amplifier or Dante amplifier in Malaysia?

The PAVAVOICE GPA410 Series is designed for demanding commercial and professional audio projects that require high-output amplification, integrated DSP processing, FIR tuning and network control.

Contact PAVA for product matching, AV system configuration and project quotation.

Call / WhatsApp: +60 12-688 0966
WhatsApp: https://wa.me/60126880966